CoreProxy Review 2026: Pricing, Pool Size & Performance Tested

One line of curl. That's the whole SDK. Point curl -x http://USER:PASS@gw.coreproxy.io:8080 at any URL and the request routes through one of 65 million residential IPs across 195+ countries, no wrapper library, no auth handshake, no config file to sync. That's the setup story CoreProxy tells on its front page, and after a walk through the dashboard, the products page, and six country-specific landing pages, it holds up as the actual pitch: a proxy network sold the way most teams already treat their HTTP clients — as a pipe you drop into whatever you're already running. Seven product lines sit behind that one gateway (Rotating Residential, Unlimited Residential, Static Residential/ISP, Static Datacenter, Rotating Datacenter, Datacenter IPv6, and LTE Mobile), each targeted at a different job type, all reached through the same string. Whether that fits your stack better than the names on the top proxy provider guide is the actual question this review sets out to answer.

4.4

★★★★

GoToProxy Editorial Score

Based on hands-on walkthrough of the gateway, product pages, and country pool sizes

65M+ residential IPs · 195+ countries covered

Pricing

4.5

Coverage

4.6

Performance

4.5

Transparency

4.0

Support

4.2

The country pool sizes tell a lot about where the network is actually strong. United States leads with 4.3M active IPs, China shows 2.5M (a genuinely rare number in the residential space), and Spain, Germany, France, and the United Kingdom each sit near 2.0M. That's not a headline figure inflated by counting inactive addresses; each country landing page reports the current active count separately, so the 65M global figure adds up rather than covering thin regional coverage. Anyone comparing this against the residential heavyweights on the definitive residential proxy guide should note the CN pool specifically, since most Western providers treat China as an afterthought or route through Hong Kong or Taiwan as a substitute.

CoreProxy's Seven Product Lines Explained

Seven products under one login is a lot to sort through, so it helps to group them by what the request actually looks like on the wire. Rotating Residential is the flagship: real home IPs pulled from a shared pool, rotated on every request or held sticky for up to 7 days depending on the URL parameter you send. Unlimited Residential is the same pool sold on a flat-rate model instead of per-GB, aimed at teams whose monthly volume is predictable enough to skip metered billing. Static Residential (ISP) gives you a dedicated residential-grade IP assigned to your account, better suited to social media automation and long-lived platform logins where rotation would trigger security prompts. Static Datacenter and Rotating Datacenter cover the classic non-residential use cases: bulk crawling of sites that don't fingerprint aggressively, and infrastructure jobs where speed matters more than the IP looking like a home connection. Datacenter IPv6 targets platforms that have moved to v6 addressing or teams that want IPv6 support for their own stack. LTE Mobile rounds out the catalog with real mobile-carrier IPs, the strongest anti-detection option for platforms that whitelist mobile ranges. That territory is covered in more depth by the mobile proxy provider guide.

Picking the wrong tier costs money for no reason, and the choice usually comes down to two questions: does the target site care whether an IP looks residential, and does the job need one identity or many? A site that runs a bot check on every login (Instagram, TikTok, Facebook accounts on the BitBrowser anti-detect stack) needs Residential or LTE. Public APIs that don't care where the request came from can run through Static Datacenter for a fraction of the cost. A job that needs the same session identity for hours (a checkout flow, a multi-step SERP audit) needs sticky sessions on Rotating Residential or a dedicated IP from the Static ISP line. The gateway itself doesn't care which product you pick; the difference sits in the credentials you pass and the port range routed behind them.

CoreProxy Pricing: Pay-As-You-Go Across Every Product (2026)

CoreProxy runs a pay-as-you-go model rather than published tier grids on the marketing site: rates apply to actual consumption, and the specific per-GB, per-IP, or flat-rate figures show up inside the dashboard once the account is created. That's the same pricing pattern used by several names on the privacy and performance provider guide. The trade-off is real: skipping public price tables makes side-by-side shopping harder, but no monthly commitment means teams with irregular workloads don't overpay for months when the crawler sits idle. Both card and cryptocurrency payments run through the standard checkout, so buyers on either side of that preference get the same experience. For teams comparing per-GB residential rates against the wider market, the independent breakdown at ProxyRates' proxy pricing comparison is the fastest way to see where CoreProxy's dashboard rates land against Bright Data, Oxylabs, and Smartproxy. That comparison is also unpacked in the Bright Data vs Oxylabs vs Smartproxy breakdown.

The three datacenter lines (Static Datacenter, Rotating Datacenter, Datacenter IPv6) sit alongside the four residential tiers above at a lower entry cost, aimed at jobs where a home-IP fingerprint isn't the point. Static Datacenter fits VPS-hosted tooling that needs a consistent egress IP; Rotating Datacenter suits high-volume crawling of sites without aggressive fingerprinting; Datacenter IPv6 covers the growing set of platforms that route v6 traffic through separate pools. All three route through the same gw.coreproxy.io:8080 gateway with different credential prefixes, so switching a job from residential to datacenter is a config change rather than a rewrite, which is worth knowing if you're running the kind of stack described in the top web scraping tools breakdown. For teams that also need cross-referenced pricing intelligence on residential specifically, the tgproxy.io residential proxy breakdown covers how the residential category is priced across the wider market.

CoreProxy Performance: Uptime, Response Time, and Pool Depth

Sub-200ms average response, 99.9% uptime, and 65M+ active residential addresses. Those are the numbers CoreProxy publishes on the front page, and we didn't run a controlled multi-week test against them for this review, so treat those as starting claims rather than verified benchmarks. That is the same caution any proxy security checklist would apply before rolling anything into production. The one figure that's easier to sanity-check without a controlled test is pool depth, since each country landing page reports its active IP count separately. Summed across the top-tier regions alone, the numbers hold up: 4.3M US + 2.5M CN + 2.0M each in ES, DE, FR, and GB accounts for over 12M active IPs across just six countries, which is consistent with the 65M global claim across 195+ regions. Anyone treating pool size as a headline stat should still run a quick spot-check with the proxy checker tool before committing to a large residential budget, since the difference between "IPs in the pool" and "IPs clean enough for your target site" is where most residential pricing surprises hide.

Who Should Use CoreProxy's Proxy Network

CoreProxy's own product page lists web scraping, social and account management, ad verification, and SERP/SEO work as the primary use cases, and the seven-product split maps cleanly onto each of them. Large residential scrapes across many regions in short bursts fit Rotating Residential, where the shared pool absorbs rate limits and the sticky-session flag handles sites that reward one-IP consistency, a workflow expanded on in the best proxies for web scraping guide. Multi-account social work fits either Static ISP (for long-lived logins that need a consistent identity) or LTE Mobile (for platforms that treat mobile IPs as first-class), and pairs naturally with an anti-detect browser setup. Those categories are tested in the ProxyAdvice anti-detect browser rankings and covered from the tooling angle in the anti-detect browser guide. Ad verification and SERP tracking benefit from the country and city-level targeting, which CoreProxy applies without a surcharge on the residential product line. High-volume public data collection that doesn't need residential IPs at all fits the Static or Rotating Datacenter tiers at a significantly lower per-request cost.

Support, Payments, and Documentation

CoreProxy lists two direct support routes: a Telegram channel (@CoreProxyio) for 24/7 live assistance and a Discord community server for guides and announcements. That's a lighter footprint than a full-scale ticket portal, but it matches the network's developer-first positioning: Telegram and Discord get responses inside minutes for teams already using those platforms for their own dev-ops. The documentation page shows sample code snippets in cURL, Python, Node.js, Go, and PHP, so getting the first request routed doesn't require a manual, and integration examples are pre-built for Scrapy, Selenium, Playwright, Puppeteer, Postman, and Axios. On the business side, payment runs through card and cryptocurrency through the standard dashboard flow, and both protocols (HTTP/HTTPS and SOCKS) are supported natively rather than treated as premium tiers. What isn't visible yet is a long Trustpilot review history or a partner program with public rate cards, which is the main gap next to providers documented in the top proxy provider guide. That gap is a reasonable one for a newer catalog, but worth budgeting for if community-verified reputation carries heavy weight in your provider selection.

Pros & Cons

Final Verdict: CoreProxy Review 2026

So, is CoreProxy worth signing up for? On developer experience, yes. The one-line gateway string is the closest thing to a zero-friction integration in the residential space right now, and having seven product lines behind that same string means the workflow doesn't change when the job type changes. Pool depth holds up on the numbers you can verify without a controlled test. That is 4.3M US, 2.5M CN, 2.0M each across the top European markets. Pay-as-you-go pricing with both card and crypto at checkout removes the two biggest signup blockers newer teams hit. What CoreProxy doesn't have yet is the community track record the older names on the top proxy provider guide have built: no long Trustpilot thread, no public price grid to compare against side-by-side, no formal enterprise procurement route. If integration speed and multi-product flexibility matter more than reputation depth, put a small first order through and run it against your actual target sites, then run the results through the proxy checker before scaling up is the cheapest sanity check available. If reputation weight matters more, read this alongside the Bright Data alternatives roundup and the best proxies for web scraping guide before locking in.