Floppydata Review: Residential, Mobile & DC Proxies at $1/GB

One gigabyte balance, three ways to spend it. That's the pitch behind Floppydata, a proxy vendor run by FLOPPYDATA FZCO out of Dubai Digital Park that sells rotating traffic at a flat $1 per GB and lets you burn the same balance as residential, mobile, or datacenter IPs without buying three separate plans. Around that core sit static residential (ISP) proxies from $1.79 per IP, static datacenter proxies from $0.79 per IP (or a single static IP for $19 on a 4-month term), a pay-per-success Web Scraper from $0.89 per 1,000 requests, and a Cloud Browser that costs nothing beyond the proxy traffic it routes. For this review we went through the five proxy product pages, both pricing tabs, the v2 API samples, and the static bundle math line by line. Floppydata reports 12,000+ users and 1,000+ companies (IPinfo and Aptoide are among the homepage logos), and it publishes 195+ countries, a sub-0.3-second average response, and 99.99% uptime. Its residential pool is smaller than the 90M-class networks. How much that matters depends on your workload, and sorting that out is the job of this review.

4.6

★★★★★

GoToProxy Editorial Score

Based on a walkthrough of the five proxy product pages, both pricing tabs, the v2 API samples, and the static bundle math

1M+ residential IPs · 195+ countries · Res + Mobile + DC on one balance

Pricing

4.9

Product Range

4.7

Coverage

4.3

Support

4.5

Transparency

4.6

The Pricing score carries this review. A flat $1/GB on rotating traffic is one of the lowest sticker rates you'll find in the residential category, and it applies to the 19GB starter ($19) exactly as it does to a large order, so a small test costs the same per gigabyte as production. There's a flip side: there's no volume discount either, and the rate stays at $1.00/GB however much you buy. Floppydata also offers two traffic modes (expiring GBs at a discount, or non-expiring GBs that never burn), but the public pages don't print the expiring-GB rate. Ask support or check the checkout screen before you assume which one you're paying for. Transparency loses a few points for that gap and for the SOC 2, CCPA and GDPR badges on the homepage, which aren't linked to any report you can read.

Floppydata's Product Range: Rotating, Static, Web Scraper, and Cloud Browser

Floppydata splits its catalog into two shelves: Proxy (the IPs themselves) and Web Access (the tools that run on top of them). The Rotating Proxy is the center of everything. It's sold per gigabyte at $1.00, and that one balance works as residential IPs (real home connections assigned by ISPs), mobile IPs (3G, 4G, LTE and 5G carrier addresses behind carrier-grade NAT, where thousands of real subscribers share a single IP), or rotating datacenter IPs. In practice you'd send marketplaces and SERPs through the residential or mobile gateway and open targets through datacenter, all billed against the same GBs. Targeting goes down to country, state, city, ASN, and IP type. The Static Residential Proxy (Floppydata also calls it ISP) gives you a fixed, ISP-registered address hosted on datacenter hardware. You get residential trust at server speed, and the same IP stays yours for weeks or months, which is what long-lived social and marketplace accounts need. The Static Datacenter Proxy is the budget workhorse: a dedicated rack IP that never changes, good for whitelists and bulk collection where trust score doesn't matter. Everything runs over HTTP, HTTPS, and SOCKS5, with UDP in beta. If you're new to how these IP classes differ, the ultimate guide to proxy services and our residential proxy providers guide cover the basics.

The Web Access shelf is where Floppydata looks less like a classic proxy shop and more like plumbing for automation and AI agents. The Web Scraper (listed in the menu as Scraping API) takes a URL and a country code and returns the page HTML. A single POST to /v2/web-data/fetch with those two fields is the whole request; unblocking, rendering, and retries happen on Floppydata's side. It claims a 99.9% success rate and bills only for pages that come back. The menu lists ready-made scrapers for Amazon, Zillow, TikTok, Facebook, LinkedIn, X (Twitter), and grocery sites. The Cloud Browser is a managed, anti-detect Chromium you connect to over CDP (Chrome DevTools Protocol) from Playwright or Puppeteer. It has a UI mode for watching sessions live, plus variants pitched at QA testing, JavaScript profiling, and AI agents. It's free for anyone with proxy traffic. If you're paying a separate host for headless browsers on top of your proxy bill today, that's a line item you can cut. For the scraping side in context, see our top web scraping tools roundup.

Floppydata Pricing: Rotating GBs, Static IP Bundles, and Scraper Credits (2026)

Floppydata prices three ways, and every number is printed on the public pages. Rotating proxies cost a flat $1.00 per GB starting at 19GB for $19, and the rate doesn't change as you buy more. That flat line is the opposite of the eight-step price curves most residential vendors publish. It's cheap at the bottom (a $19 entry point at $1/GB is rare) but you won't get a lower rate for committing to more. Static IPs no longer need a bundle: a single static IP costs $19 for a 4-month term. For more addresses, static residential (ISP) proxies come in monthly bundles: 20 IPs for $49 ($2.45 each), 50 IPs for $99 ($1.98 each, 19% off), and 100 IPs for $179 ($1.79 each, 27% off), all with unlimited bandwidth. Static datacenter proxies follow the same shape: 20 IPs for $19 ($0.95 each), 50 IPs for $45 ($0.90, 5% off), and 100 IPs for $79 ($0.79, 17% off). The Web Scraper costs $0.90 per 1,000 successful scrapes on the 10,000-request pack ($9) and $0.89 per 1,000 on the 100,000-request pack ($89), and you only pay for requests that succeed. The Cloud Browser is free. Checkout takes Visa, Mastercard, American Express, PayPal, or any of 70+ cryptocurrencies, and you can also pay from an account wallet that can be topped up and set to auto-renew. To see how these numbers sit against the big enterprise names, read our Bright Data vs Oxylabs vs Smartproxy comparison and the shortlist of Bright Data alternatives.

Two things jump out once you run the numbers. The first is mobile traffic. Mobile IPs usually cost several times more per GB than residential at other vendors, and here they draw from the same $1 balance, so social and app-testing jobs that would normally justify a separate mobile plan get carrier IPs at residential prices. Our mobile proxy guide shows what that category typically charges. The second is the static entry point. A single static IP now costs $19 for a 4-month term, so if you only need a few fixed addresses you no longer have to buy a 20-IP bundle. Past roughly 80GB a month of steady traffic on targets that don't block datacenter ranges, a 100-IP static datacenter bundle at $79 with unlimited bandwidth costs less than the same volume in rotating GBs, at the price of losing residential trust. That trade-off follows the pattern laid out in our proxy security and best-practices guide.

Floppydata Performance: Response Time, Uptime, and IP Quality Claims

Floppydata publishes four performance figures: an average response under 0.3 seconds, 99.99% uptime, a 95% clean-IP rate, and a 99.9% success rate on the Web Scraper. We didn't run a multi-week benchmark for this review, so treat these as the vendor's starting numbers, not ours. The 99.99% uptime claim works out to about 53 minutes of downtime a year. That's ambitious for a network built partly on real home and mobile connections. The 95% clean rate is the more useful figure, because it openly admits that roughly 1 IP in 20 may already carry a bad reputation, which tells you to build retries into your scraper from day one. Pool size is the number to weigh hardest. 1M+ residential IPs is enough breadth for most country-level jobs, but it's about 90 times smaller than the largest networks, so very narrow city or ASN targeting in smaller markets may cycle back to the same IPs sooner. Before you scale, push a small batch through the GoToProxy proxy checker to confirm ASN, geo, and latency on your exact target country. Compare those results against a few addresses from our free proxy list and you'll see what a paid pool buys you.

Who Should Use Floppydata?

Floppydata lists seven classic use cases (brand protection, ad verification, traffic arbitrage, web scraping, SEO, price monitoring, and market research) plus a newer AI track for agents and RAG pipelines. The fit is clearest in four places. Web scraping and price monitoring benefit most from the single balance: start on cheap datacenter routing, flip to residential or mobile only for the targets that block you, and hand the hardest sites to the Web Scraper on a pay-per-success basis. That workflow is laid out in our best proxies for web scraping guide. AI agents and retrieval pipelines get a one-call fetch endpoint and a CDP-driven Cloud Browser, so you don't have to host your own headless fleet. Multi-account social work on Instagram, TikTok, or Facebook suits the static residential IPs (one fixed address per account) or the mobile gateway at $1/GB, a setup we cover in the social media automation use cases guide and the best mobile proxies for social media list. Pair either one with an antidetect profile like the one we tested in our BitBrowser review, or pick from the best anti-detect browsers of 2026. Ad verification and SEO rank tracking need geographic spread more than raw volume, and country and city targeting across 195+ countries covers that. Telegram account work also runs fine thanks to SOCKS5 support, matching the setup in our Telegram expert accounts guide.

Support, Compliance, and Dashboard

Support runs 24/7 through email (support@floppydata.com for help, info@floppydata.com for everything else) and a Telegram channel, and a public status page lets you check for outages before you open a ticket. The operating company, FLOPPYDATA FZCO, is registered in Building A1, Digital Park, Dubai, so there's a real legal entity to put on an invoice. The site itself runs in nine languages: English, German, French, Spanish, Russian, Portuguese, Ukrainian, Bengali, and Urdu. Account control goes through both the dashboard and the v2 API, where the same X-Api-Key reads balances, pulls proxy connection strings, and runs Web Data requests. The free-tools shelf is generous for a vendor this size (proxy checker, fingerprint and IP check, website checker, traffic calculator, proxy selector, and a Chrome proxy extension), and there are referral and reseller programs if you send other buyers their way. The homepage shows SOC 2, CCPA, and GDPR badges. Procurement teams should still request the actual SOC 2 report, because a badge on a landing page is not an audit letter. Refunds are covered in Floppydata's Terms of Service. For the wider basics of staying safe with any provider, our privacy tools hub collects them in one place.

Pros & Cons

Is Floppydata Worth It? Final Verdict for 2026

Yes, for buyers who want low, flat pricing and the freedom to move between proxy types without juggling three plans. The $1/GB rotating balance that works as residential, mobile, or datacenter traffic is the strongest idea in the catalog, and it makes mobile IPs cheaper here than at almost any vendor we've reviewed. Static datacenter IPs at $0.79 and static residential IPs at $1.79 (on 100-IP bundles) with unlimited bandwidth are priced to compete. Add the free Cloud Browser and the pay-per-success Web Scraper, and a small team can run scraping, account work, and AI-agent fetches from one account and one API key. The limits are real, though. A 1M+ residential pool won't match the depth of the biggest networks on narrow geo targets, there's no volume discount on rotating GBs, and you'll want written confirmation on expiring-GB pricing and compliance paperwork if your company needs it. For freelancers, agencies, and mid-size scraping teams, Floppydata earns a spot on the shortlist next to the names in our top proxy providers guide. Start with the 19GB starter, run a few IPs through the proxy checker on your target country, and try all three traffic types against your real targets in the first week. You'll know quickly whether the $1 math holds up on your workload.